A proper blend of Creatinine, pH levels, and other normal human urine components with a specific gravity that makes it incredibly similar to naturally emitted urine. XSTREAM FETISH URINE has thoroughly been tested in a lab before being given to consumers and 100% toxin free. It is easy-to-use and requires no mixing; this product is male/female compatible.
- 3oz Fetish Urine Sample
- Bottle with Squirt Cap
- Heat Pad
- Temperature Strip
- Heat Induction Cap
DIRECTIONS: (SINGLE USE ONLY, once opened and heated must discard after SINGLE use)
1. Shake well, unscrew cap and remove foil seal (discard seal). Place bottle in the middle of your microwave for 10-15 seconds to insure temperature strip reads between 94-100 degrees F. If temperature strip doesn’t read right away don’t be alarmed, the sample is either too cold or hot, give it a few seconds, if temperature is not met reheat for 5-10 seconds to get temperature to 94-100 degrees.
2. After heating, screw on flip cap provided and shake bottle to eliminate any sediment on the bottom of the bottle.
3. Remove the enclosed heat pad from the plastic pouch and shake well to activate heat. Next peel adhesive and stick on the side of the bottle on the opposite side the temperature strip (this will insure proper temperature reading). Leave heating pad on the bottle since it will last up to 8 hours. You can re-heat as many times as you like to meet your needs and remember a comfortable temperature is 94-100 degrees.
NO MICROWAVE? NO PROBLEM. To heat this product, simply attach the supplied heat pad directly to the bottle, on the opposite side of the temperature strip and store bottle close to your body. Depending on ambient temperature product could take up to 1 hour to reach optimal range of 94-100 degrees.